1. Suitable and Stable Friction Coefficient
The friction coefficent is controled within 0.18≤µ≤0.2, which is better for the transfer of moment friction and the control of noise. Further, adding some high temperature regulator in the friction material can prevent the decompound of rubber and colophony in high temperature environment, and control the heat decline and stable friction coefficient.

2. Better Friction Capability
Material Abrasion 2.954△W×10^-3CM3/J＜International Standard 12△W×10^-3CM3/J
Allelomorph Abrasion 0.693△W×10^-3CM3/J＜International Standard 2.5△W×10^-3CM3/J
The friction capability is 1.2~1.5 times better than the other company.

3. Better Mechanism Intensity
The scaleboard of Friction disk, which is producing according to the International Standard, is made of Aluminium ADC12 and with the thickness of 1.8mm. There are enough mechanism intensity and enough combination intensity during normal and high temperature to ensure the firm combination between friction material and Aluminium.

4. No Driving Noise
Rubber fibre compounded material is better than the half-metal and metal material, whose pliability can conquer the hardness of products, get lower the friction noise between driving friction plate and driven friction plate and avoid the carbonized layer forming on the surface to reduce the frequency of vibration.

5. Abruption and motorcycles start driving in cold weather smoothly.
Our company had invited a sweden engineer and a friction material expert from Taiwan to study on the friction material.After the research and test for a long time, applying the TAGUCHI method from Japan, we solved the problem of abruption and motorcycles start driving in cold weather. By now, we had got the acknowledgement from Da Chang Jiang, Hao Jiang, Hao Tian, Hao Jin, Da Yang, Feiying and so on.

6. No Asbestos Product
Healthy Career and Environment Protection are the final pursuit of all human beings.